POWERLIFT 6S - Lifting device with stainless steel bush

Frequently asked questions

• Which seals should be used to seal mobile partitions equipped with POWERLIFT or ADELIFT elevators?

  We recommend our seals P/N 1132400 or 1132397.

• How can operating a mobile partition on multi-temperature vehicles be facilitated?

  Operation of the partition involves several factors:
  The partition elevators, which should have elements to provide optimum sliding:
  We recommend our ADELIFT or POWERLIFT elevators, which ensure ergonomic operation.
  The presence of a decompression hatch. In this case, we recommend the installation of an OXZY decompression hatch, P/N 240511796, specifically designed for this application.

• What are the differences between the POWERLIFT and ADELIFT mobile partition elevator systems?

  Both systems are designed to raise mobile partitions in multi-temperature transport vehicles.
  POWERLIFT elevators should be preferred when the partition is positioned far into the vehicle. ADELIFT elevators should be preferred when the partition is positioned close to the vehicle rear doors. Furthermore, the width of the ADELIFT elevator slide rails provides easier retrofitting.

• How to install the aluminium sliding rails 800507247/246 when they are used with manual POWERLIFT 510511854 ?

  Rails must be installed on the body ceiling using M8x40 screws respecting a maximum distance of 600 mm between each fixing point and according to the specification of our fitting instruction n° 0052

• How to install the aluminium sliding rails 800507247/246 when they are used with manual POWERLIFT 510511854 ?

  Rails must be installed on the body ceiling using M8x40 screws respecting a maximum distance of 600 mm between each fixing point and according to the specification of our fitting instruction n° 0052.